|
Post by raypaice on Oct 27, 2022 5:51:44 GMT
Could be many things. Is it on a bike with a Variator? It could be carb needs cleaning, points dirty, timing, crankshaft seals etc.. We need a bit more info but basically you’re saying it’s not pulling under load? Where do you live one of us could be local and could help.
|
|
|
Post by moby54 on Oct 27, 2022 16:13:53 GMT
Could be clutch engaging too quickly.causing sluggish pick up.but as ray says could be numerous things.
|
|
|
Post by billbo45 on Oct 27, 2022 17:09:32 GMT
A blocked exhaust.
|
|
|
Post by Peter Harrington on Oct 29, 2022 9:07:39 GMT
Hi, thanks for all of the suggestions but have checked them all apart from the clutch engaging the exhaust is free, it would not rev freely if any of the ideas were at fault. it ticks over good, revs right up while on the centre sand, as sn as here is load on, it will not pick up.
|
|
|
Post by raypaice on Oct 29, 2022 9:52:40 GMT
Where are you, someone maybe able to look at it for you
|
|
|
Post by Peter Harrington on Oct 29, 2022 11:46:33 GMT
Hi, Scarborough
|
|
|
Post by raypaice on Oct 31, 2022 14:33:28 GMT
Nearest I know is Arnoldnott aka George but he's still 60 miles south of you. Anyone closer?
|
|